Do-it-yourself wooden garden storage boxes are a simple means of storing seasonal and temporary items. Wooden storage boxes can be used within the garage, on the patio or in a storage shed to hide seasonal equipment, such as patio sets, pool equipment, bikes and machinery. While it is possible to buy a storage box at a hardware store, building a wooden one at home is a cheaper alternative and the box can be personalised and custom-built to fit into any space.
Measure the space where What’S The Best Garden Storage Box? will be placed, and jot down the figures for the height, width and depth you will need the package to become. Draw the pieces required for the four sides from the box on the plywood sheets, using a pencil. You will need two side pieces measuring height by depth, as well as the front and back pieces should measure height by width. Eliminate the four pieces with the saw. Use the sandpaper to help make the edges and surfaces smooth and splinter-free.
Arrange among the side pieces so it will be perpendicular towards the front piece. Both pieces needs to be on end, as well as the end in the side piece needs to be covered by the outer lining side in the front piece. Quite simply, one side pieces will be attached in the front and rear piece ends.
Attach both pieces utilizing the drill and also at least four screws with the front piece. Attach the second side piece in a similar manner towards the opposite end of the front piece. Guarantee the second side piece’s end is inside the front piece. Last, attach your back piece using the drill and screws, so both ends in the side pieces are included in this last piece. You need to have a rectangular wooden frame.
Look at the rectangular frame’s perimeter. This will give you the measurements for the bottom and lid pieces. Write the measurements down. Transfer the measurements for the plywood, employing a pencil. Be sure they’re square, then cut them by helping cover their the saw and sandpaper both pieces.
Attach the base piece by lining it towards the wooden frame. Place the level on the box to be sure the piece is level as well as. Attach it with screws placed every 6 inches, drilling the screws through the bottom piece and into comfou four sides. When done, transform it over, so you own an open box without having a lid.
Attach two hinges to the lid piece, screwing those to the underside of among the long sides. Flip the wooden garden storage box on its side to set up the lid properly. Line the lid up to the package so that the hinges are in the box and attach the hinges using screws as well as the screwdriver. Flip the wooden storage box right side up and close the lid.